How it works
Home page
Models
Where to buy
Wholesale
distributors
Installer page
Data sheet
Contact us
The Cellar Saver is attached to the vertical flow-pipe by an
eleven inch tie-wrap that comes with the unit and then wired to
a 24 hour zone on a monitored alarm system. The best place
to mount the Cellar Saver is about even with the drain tile.  If
the sump pump should fail, the rising water captures air in the
inverted cup at the lower end of the swing arm. (see above).
The swing arm then pivots on the center pin and rotates the
magnet end away from the attached contact creating an alarm
condition.


Sump Pump Failure Warning Device!
Float
Click on float to
see alarm view
CELLAR SAVER, INC.
Cleaning