Alarm view
Home page
Models
Where to buy
Wholesale
distributors
Installer page
Data sheet
Cleaning
Contact us
The Cellar Saver is attached to the vertical flow-pipe
by an eleven inch tie-wrap that comes with the unit
and then wired to a 24 hour zone on a monitored
alarm system. The best place to mount the Cellar
Saver is about even with the drain tile.  If the sump
pump should fail, the rising water captures air in the
inverted cup at the lower end of the swing arm. (see
above). The swing arm then pivots on the center pin
and rotates the magnet end away from the attached
contact creating an alarm condition.


Sump Pump Failure Warning Device!
Float
Return
Return
CELLAR SAVER, INC.